FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Wiring fasterners/clips
Good day all,
Working at cleaning up some wiring in the engine compartment. I have a number of plastic push-through fasteners that hold wiring harness' in position. I'm not sure what the term for these items are called. Not sure where to find replacements. A couple photos attached. Thank you in advance.
__________________
1968 Firebird IAIIa 522 340 E-heads Northwind with XFlow TBI 4L80E 3.50:1 Rear 1969 Firebird 350/TH350 Mostly stock 2.56:1 Rear |
#2
|
||||
|
||||
I think NAPA has a whole book of those kinds of things to choose from.
George
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
The Following User Says Thank You to george kujanski For This Useful Post: | ||
#3
|
|||
|
|||
If your not concerned with it looking exactly OE. I have some Christmas tree fasteners with a zip tie built into it. They should go in the same holes. I can send you some for a couple bucks and postage. PM me if interested.
|
#4
|
||||
|
||||
Clip in the last photo, I believe, is in the Ames catalog under front end trim or front end section. I know I purchased them before, but cannot recall where.
The ones that are wrapped in the wire harness I do not recall seeing in a resto catalog, then again I haven’t looked for them. The suggestion of going to Napa or some other parts store is a good idea. I would recommend going to an old school one….one that still has paper catalogs, so if push comes to shove you could ask to peruse a buyers guide. One of these days I’ll break out all my Dorman, help, borg Warner ones from early 90s…veritable gold mines for finding oddball things like that.
__________________
costs too much |
The Following User Says Thank You to rolling money pits For This Useful Post: | ||
#5
|
|||
|
|||
So many variations of these as used by most makes in some form.
https://www.musclecarcentral.com/196...-p/wir-344.htm https://www.ebay.com.au/itm/193778269953 https://jcaparts.com/products/gm-inn...etainers-clips |
#6
|
||||
|
||||
You can shuffle through a large list of them here, too:
https://www.clipsandfasteners.com/default.asp .
__________________
. 1970 GTO Judge Tribute Pro-Tour Project 535 IA2 http://forums.maxperformanceinc.com/...d.php?t=760624 1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car https://forums.maxperformanceinc.com...ght=procharger Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be |
The Following User Says Thank You to HWYSTR455 For This Useful Post: | ||
#7
|
|||
|
|||
I thank you. I did actually stumble across that website. I sourced one of the clip styles from them, another from a local parts store and yet another from the ss396 website. A little bit of a scavenging hunt but I think I've got everything I'm needing on order. A little hard to tell from some of the online photos and descriptions but I think I'm on the path to success. :-)
__________________
1968 Firebird IAIIa 522 340 E-heads Northwind with XFlow TBI 4L80E 3.50:1 Rear 1969 Firebird 350/TH350 Mostly stock 2.56:1 Rear |
Reply |
|
|