| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
01-28-2005, 02:12 PM
|
|||
|
|||
After 3 years, I'm finally getting my GTO back together. On the wiring diagram it shows 2 black with red stripe wires attached to the rear of the altenator, one with a 30 amp fuse. I do not have that wire. On my 1966 GTO it is there. I was wondering if the wiring diagram is wrong or if it is supposed to be there. Any suggestions as this is a frame off resto. The wiring harness had been altered by the previous owner(s)
|
|
#2
01-28-2005, 02:12 PM
|
|||
|
|||
|
After 3 years, I'm finally getting my GTO back together. On the wiring diagram it shows 2 black with red stripe wires attached to the rear of the altenator, one with a 30 amp fuse. I do not have that wire. On my 1966 GTO it is there. I was wondering if the wiring diagram is wrong or if it is supposed to be there. Any suggestions as this is a frame off resto. The wiring harness had been altered by the previous owner(s)
|
|
#3
01-28-2005, 02:51 PM
|
||||
|
||||
|
The fused one, I believe is the feed to the Blower Hi relay on a A/C car. Or at least that's what I heard. Can't seem to confirm it from the '67 schematics tho.
George
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
|
#4
01-28-2005, 06:31 PM
|
|||
|
|||
|
Sounds like you may have hit it. My 66 has air, but my 65 doesn't.
Thanx Don |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
