 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
11-01-2007, 04:06 PM
|
||||
|
||||
Wanted: 3.23 to 3.55 posi for 1968 GTO
I presently have a '68 GTO with a 400 and a 2.76 posi 10 bolt (posi not always works). I am in the process of building a fairly strong 455 and I want to upgrade to either a 3.23-3.55 gear. I was told by a drive train rebuilder the parts to rebuild the rear are no longer available and the adapter to go from a 2- series rear end to a 3- series rear end makes the already weak (he said the 8.2 rear end is one of the weakest GM makes) even weaker.
Any ideas? Is this guy right? Anyone have a good posi they want to sell? I could do a partial trade for parts (I have bare cast #13 heads, armasteel crank, new-in-box (NIB)Autometer 6809, NIB Torquer II, nice original Torquer, 850 Holley DP, etc. to trade or I can buy outright. Thanks for the use of this great site. Tony |
|
#2
07-02-2008, 04:48 PM
|
||||
|
||||
|
10 bolt 12 bolt posi 3.55 3.42 3.36 etc
I can builfd what ever you want...But can not use any of the parts you have...Maybe th e old posi unit and maybe gears is about it. But in the condition it will not be much. Jim
just PM me if you have any interest |
|
#3
07-02-2008, 04:57 PM
|
||||
|
||||
|
hmm, thats odd because I just bought a complete Yukon Gear rebuild kit. Also bought a brand new Eaton posi and Richmond 3.90 gears. I plan on getting the axle assembly (69 GTO 8.2) out of storage this weekend and begin the rebuild process.
__________________
http://gloryrestoparts.20megsfree.com/ 1970.5 Pontiac Tempest GT-37 400ci 4bbl 4sp 3.90:1 12.73 @ 112.42 2011 Pure Stock Drags 12.71 @ 110.58 2013 Martin FAST/FS race 12.70 @ 111.74 2014 Pure Stock Drags 12.60 @ 111.66 2015 Martin FAST/FS race 1968 Pontiac Firebird 400 TH400/3.08 open export car - factory heater delete 14.48 @ 95.86 w/ 2.14 60' 2018 Pure Stock Drags 14.47 @ 95.02 w/ 2.16 60' 2019 Martin FAST/FS race |
|
#4
07-03-2008, 05:44 AM
|
||||
|
||||
|
I have a new posi unit:
http://forums.maxperformanceinc.com/...d.php?t=563093
__________________
Gregg V. |
|
#5
03-22-2009, 02:35 AM
|
||||
|
||||
|
Parts for 8.2 10 bolt rears
Boy that shop must be in the dark ages. The pontiac 10 bolt 8.2 rears still ahve alot of parts for sale
Rebuild kits gears 3.36 3.55 3.73 3.90 Posi units 2.93-3.23 auburn Posi unit 3.36-4.33 and beyond Auburn and eaton we can get custom axle shafts made from Moser if you need. ALL you need is a housing...  We are all here to help you out just PM one of use and I am sure we can help who ever might be the closest or just talk to us and you deside whp can help you the best. Jim |
|
#6
03-22-2009, 02:42 AM
|
||||
|
||||
|
Strength of the 8.2 10 bolt
AND as for the guy saying that it is one of the weakest rear GM everproduces is TOTALLY nonsense...lol. I can name a ton more weak than that rear...lol.
The pontiac 8.2 has bolt in axles making it very safe if something were to go wrong inside the diff. The axle shaft will stay intact in the housing not to ruin the rear 1/4 of the vehicle. For the street most rears all the way to the 7.5 will do the job just fine AS LONG as maintenance is kept up...Most unfortunately are 30+ year old containing the same fluid from 1960...lol. JUST not fair to evaluate or compare rear that are not in tip top shape form the beginning. anY NEW DIFF WILL WORK LONGER AND BETTER THAN A 40 YEAR OLD out of spec low on fluid diff no matter the size. Jim Hope some of this info helps |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
