[njsteve]

My latest connundrum will be getting the front spoiler installed. Once the valance is bolted up, how do you put the front spoiler on, since both ends of the spoiler have about 3 inches that interlock with the hollow portion of the flares. Logic would dictate that you remove one of the flares and slide the spoiler in, and then reinstall the flare.

The problem arises when you try to remove or reinstall the flares as you have to be able to access the two large bolts that go in from the inside of the fender, into the flare. With the valance on, you cant access the front bolt.

It's like a Catch-22 situation. I was thinking about removing the bottom fender-to-radiator support bolts and pulling the bottoms of the fenders apart to slide the spoiler in, but they dont move more than an inch or so.

Any suggestions from you Wil-E-Coyote super-geniuses out there?

:-)