[Vol]

Originally Posted by PurelyGTO68

The rubber seal is secured with 4 metal retaining clips that are sorta T shaped.
Here are some photos of a core support that I pulled from a LeMans (V8 A/C car) On this example, the seal is also secured on the LH side with the same bolt used to fasten the lower LH radiator mount. Hope these photos help...

Those are perfect. I have the seal, and it only goes in one way from what I can tell. There are some flat indents in the rubber where a fastener went so I figured it must be a T-bolt of some sort. Thanks for sharing.

Now I need to dig through all my parts buckets to see if I have those fasteners or find something close that will work. Since this build is not an original I am not concerned.