[Sirrotica]

Originally Posted by Verdoro 68

Already on it It's getting a '68 manifold, '68 Q-Jet and valley pan. I do have a set of 1.65 rockers I considered as a band aid for more lift, but then I remembered that I'd have to clearance the heads.

You're going to have a heat crossover mismatch with any intake 71 and earlier on 72 and later heads, just a heads up if you hadn't thought about the mismatch.


Exhaust Crossover Port Matchings
With Head And Manifold Use Gasket
1965-71 1965-71 1965-71
1965-71 1972-79 1972-79
1972-79 1972-79 1972-79
1972-79 1965-71 1965-71**

** Use thin sheet stainless steel as a block off plate.