| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#10
09-12-2025, 09:19 AM
|
||||
|
||||
At a port volume of 185 CCs that 17% bigger then the stock 154 CC intake port.
The minimum valve bowl diameter of the KRE heads is 12% bigger than the stock factory size. This all adds up to less port velocity and throttle response until the motor gets up to the rpm where it can make use of the added air flow offered by the KRE heads. With his now far better 200 psi of cranking pressure Rhoads lifters can not be used.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
| The Following User Says Thank You to steve25 For This Useful Post: | ||
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode