[gtorich]

Thanks Mick, will check that out also

Mike the roller lifters are Johnson High Performance Hydraulic Roller Lifter Set JLI-2112OPR-16
JLI-2

Will take a look at them tomorrow, i take it there should be no marks on these at all. These are only two yrs old, oh boy.

So far from most comments, about the only think i could use is maybe my timing cover, the one with the dimple for the tri power.

I was hoping starting from scratch didnt really mean starting out with nothing. lol

Lets see if i got this right, so far

Should maybe try a different block
Should replace the rods, all the bearings
Might as well get new pistons
Might as well get a new crank
Might need new roller lifters
Get a oil pan with a baffle
So far it looks like i can keep my timing cover and that little cam plate thing.......lol...........yep, i think that covers starting over, i"ll get this figured out yet.

Rich