[Hooter]

Originally Posted by Region Warrior

Correct me if i'm wrong Brad.

Hoot's build is with ancient Wenzler heads with more miles then a French whore.
Top if off with a block from same brothel and an ancient bathtube with 2-750 afb's.
Plan wasnt to pound his chest. There's some serious money guys in his group. They trash between rounds.
Then there's others like Brad. Just have'n fun race'n and hang'n with bud's. Their a pretty tight group.
Hit most of the Midwest Nostalgia SS events, run all day long, not get dirty, relax at nite, repeat next day.
Get home, leave car in trailer, wait for next event.
How much better can it get?!

That pretty much nailed it, except mine are old wideports and it's a Hogan designed to look like a bathtub. I'm guessing I've picked up quite a bit over the old motor. The car's gonna run pretty good and get me down the track more than fast enough to hang with our group. Mission accomplished. If I want to get serious down the road, I'll throw some Holleys on it and more compression.

The original design intent of this was to make a conservative 875. Getting into the motor, there were many issues(Larry ran it hard for years) and just about everything got touched to some degree. Yeah, the sum of the parts are more oriented toward a higher end goal but I was able to pick up a lot of these parts reasonable from fellow racers and it could be considered over engineered for the build. As Mike mentioned above, I'm more into having fun than making a huge number. It's in the car and I'm working to get a few other things wrapped up on it. We'll see how it goes down the track.

[john marcella]

Hooter, i hope you get the real meaning of my posts about your motor. They are not intended to be malicious..

[john marcella]

Originally Posted by GREATGTO

Sorry,I didn't know that you guys knew all the specs to this engine enough to come in here and say it didn't make enough power . Was also nice for you to say you mean no disrespect to Hooter then in your very next sentences do it anyway!

I didn't see Hooter in any of your posts disrespecting you or your builds.I guess he could have went into Leeches post where his engine blew all to hell and said he felt it should have stayed together longer than 5 minutes based on the specs and the parts he had, must have been built by an idiot? Yeah he could have said he felt Quinns car should have ran a lot better with Marcellas. intake that cost an arm and a leg and ran the same as a cast intake that Marcella said was junk ? Yeah he could have, hmm but didn't.

I guess he has class, something some people will never have.

535 , 13 to 1 , 2 carbs on a sheet metal , wide port e-heads said to be real good.
Seems to me should be a bit better at a quick glance. Thats all, sorry if im not the guy who says ....hey good job..........and then turns to his buddy and says .....wow what a turd that should have made more. If that makes me an ass hole in your eyes, well then im an ass hole, im ok with that.

As far as the rest of your post and past posts, i think create your own false reality and are probably pathological because the truth is to hard for you.

Sincerely,
Ass Hole

[Jeff Kinsler]

Originally Posted by Hooter

That pretty much nailed it, except mine are old wideports and it's a Hogan designed to look like a bathtub. I'm guessing I've picked up quite a bit over the old motor. The car's gonna run pretty good and get me down the track more than fast enough to hang with our group. Mission accomplished. If I want to get serious down the road, I'll throw some Holleys on it and more compression.

The original design intent of this was to make a conservative 875. Getting into the motor, there were many issues(Larry ran it hard for years) and just about everything got touched to some degree. Yeah, the sum of the parts are more oriented toward a higher end goal but I was able to pick up a lot of these parts reasonable from fellow racers and it could be considered over engineered for the build. As Mike mentioned above, I'm more into having fun than making a huge number. It's in the car and I'm working to get a few other things wrapped up on it. We'll see how it goes down the track.

good for you. If your happy thats all that matters. I was not slamming your motor, just other a-holes that make it look that way.

[adam woodmancy]

It's a great day to be a nobody.

[bpenrod]

I don't keep up much with these head wars, so I have to ask, did Langers a$$ ever get busted? Seems I recall 3,4,5, years ago some cv engine was gonna' have him covered by a few tenths!

[LiL Jack]

Originally Posted by bpenrod

I don't keep up much with these head wars, so I have to ask, did Langers a$$ ever get busted? Seems I recall 3,4,5, years ago some cv engine was gonna' have him covered by a few tenths!

No, the car has never ran down the track and we have not even heard that it was dynoed.

[Jeff Kinsler]

Originally Posted by LiL Jack

No, the car has never ran down the track and we have not even heard that it was dynoed.

I think Magic Man Marcella will drag that thing down the track..

[XSIVPWR]

Originally Posted by adam woodmancy

It's a great day to be a nobody.

LOL...well said! I fall into this category.

[john marcella]

Originally Posted by Jeff Kinsler

I think Magic Man Marcella will drag that thing down the track..

The only thing that im sure im dragging down the track is my wallet
Im just doing what i am doing, im not going after anyone.

But i would like to bust LiL Jacks azz on 1 kit I dont even know why.LOL

[GTO Dan]

Originally Posted by john marcella

But i would like to bust LiL Jacks azz on 1 kit I dont even know why.LOL

Because unless you are a Pro or grudge racer this is all just for fun and bragging rights.

[LiL Jack]

Originally Posted by john marcella

The only thing that im sure im dragging down the track is my wallet
Im just doing what i am doing, im not going after anyone.

But i would like to bust LiL Jacks azz on 1 kit I dont even know why.LOL

That should be fun, I just went a [email protected] on one kit, so you better go out and start tuning on that fireterd!

[Jeff Kinsler]

Originally Posted by LiL Jack

That should be fun, I just went a [email protected] on one kit, so you better go out and start tuning on that fireterd!

that' it. i went 5.35 129 on motor.

[LiL Jack]

Originally Posted by Jeff Kinsler

that' it. i went 5.35 129 on motor.

Those light ass cars don't need a lot of power to get down the track.

[Jeff Kinsler]

Originally Posted by LiL Jack

Those light ass cars don't need a lot of power to get down the track.

lmfao..

[john marcella]

Originally Posted by LiL Jack

That should be fun, I just went a [email protected] on one kit, so you better go out and start tuning on that fireterd!

If thats all you got, bring $$$$$$$$$$$$$$$$$$$

[LiL Jack]

Originally Posted by john marcella

If thats all you got, bring $$$$$$$$$$$$$$$$$$$

Will do!

[Jeff Kinsler]

Originally Posted by john marcella

If thats all you got, bring $$$$$$$$$$$$$$$$$$$

DIDTHATJUSTHAPPEN?????

[bad69bird]

Originally Posted by Jeff Kinsler

that' it. i went 5.35 129 on motor.

OHNOYOUJUSTDIDNT?!?!?!?!

Originally Posted by Jeff Kinsler

DIDTHATJUSTHAPPEN?????

ONYESHEJUSTDID!!!

[john marcella]

Lil Jack= My new BITCHLOL