[RAIV-Z]

Originally Posted by GTOGEORGE

Why would you want to leave in second? Your clearly not putting any power to it til the back half of the 1/8.....just wondering.


GTO George

To see what effect is has on building boost sooner with the current tune.

[LiL Jack]

Originally Posted by RAIV-Z

To see what effect is has on building boost sooner with the current tune.

You need to hit it hard out the gate to get it moving.

[RAIV-Z]

Originally Posted by LiL Jack

You need to hit it hard out the gate to get it moving.

What RPM are you launching at? I'm at 4800rpm now, planning on increasing to to ~5500.

[GTOGEORGE]

Originally Posted by RAIV-Z

What RPM are you launching at? I'm at 4800rpm now, planning on increasing to to ~5500.

So what kind of boost you running ......leaving and down the track?

GTO George

[RAIV-Z]

Originally Posted by GTOGEORGE

So what kind of boost you running ......leaving and down the track?

GTO George

~6lb on the launch with a target of 12lb as the last event, target and a target of 20lb going down the track.

[LiL Jack]

Originally Posted by RAIV-Z

What RPM are you launching at? I'm at 4800rpm now, planning on increasing to to ~5500.

3700

A buddy of mine leaves on 12#, but closer to 40# down the track.

[wreckmastr]

Originally Posted by RAIV-Z

What RPM are you launching at? I'm at 4800rpm now, planning on increasing to to ~5500.

Are you pulling any timing on the launch (Launch retard)?

3400 launch at 9lbs here

[RAIV-Z]

Originally Posted by wreckmastr

Are you pulling any timing on the launch (Launch retard)?

3400 launch at 9lbs here

I'm not pulling any timing while on the t-brake in the current tune.

[LiL Jack]

Originally Posted by RAIV-Z

I'm not pulling any timing while on the t-brake in the current tune.

That’s correct you should not be or it won’t go up on the brake. It activates when u let go of the brake. You might want to try lowering the leave RPM, it will hit the converter harder.

Work on the front half and the back half will follow.