[lugnutt]

Don't know if this is a production piece or not. Do you know anyone that sells a fabricated water crossover? Just really hate the look when you cut the front of a intake off.
Thanks

[p4msi1]

Lugnut, just build it yourself, its easy.

[60man]

Happy New Year Lug...
Bigchief468 is running a KRE sheet metal intake...and has a sheet metal crossover on his old motor...
Maybe you coluld check with Jeff/KRE. There is a picture of it in Performance For Sale section under NSS...

Got any 6.7 rods ??....:-)

[Ron H]

I added an old warrior crossover someone divorced long ago. KRE sells new cast pieces.

[EPC_Motorsports]

Originally Posted by lugnutt

Don't know if this is a production piece or not. Do you know anyone that sells a fabricated water crossover? Just really hate the look when you cut the front of a intake off.
Thanks

sonny leonard ''SONNYS'' Located in Lynchburg VA.

[lugnutt]

Thanks all, I think Ill try Sonnys. I looked at KRE, didnt really see anything there. I may end up making one, I just wondered if someone had one "off the shelf"
Happy New year to you to Troy. How are you feeling? I hope all is well. Maybe see ya at the track next.. I mean this year if all goes well.
I do not have any spare rods. Are you looking for aluminum or steel?
I do have a spare Nod iron crank lightened and balanced for aluminum rods.

[60man]

Originally Posted by lugnutt

Thanks all, I think Ill try Sonnys. I looked at KRE, didnt really see anything there. I may end up making one, I just wondered if someone had one "off the shelf"
Happy New year to you to Troy. How are you feeling? I hope all is well. Maybe see ya at the track next.. I mean this year if all goes well.
I do not have any spare rods. Are you looking for aluminum or steel?
I do have a spare Nod iron crank lightened and balanced for aluminum rods.

I'm starting to feel better these days....a good thing !! Hope it continues..
Just thinking ahead for aluminum rods for the 4.5 crank in the future..I assme 6.7's...let Jack call it...
Hope to catch ya at track...

[GoatDr]

Here is Kauffman's. Scroll down a bit.

http://www.krepower.com/Pontiac%20Intakes.htm

[60man]

I know KRE makes the cast crossover....But Bigchief468's intake & crossover (sheet metal) were made by KRE also...

[Ron H]

I am sure they make a sheet metal crossover, it is just not listed separately on their site. They show one in the picture of the sheet metal intake as well.

[john marcella]

Remote water manifold! I will post pics tomorrow. Way better way to go.

[huddie]

I am interested in the Pic and the idea of the remote water manifold.Thanks

[john marcella]

This is one of my 4 into 1 water manifolds. It's set up for 4 #10 o-ring fittings (but you can use a combination fitting that is up to #12) and 1 #20 o-ring on the opposing side.
I also make a 2 into 1 water manifold. It uses 2 #16 to 1 #20.
Both have provisions for NPT for water temp pick up.

[60man]

Originally Posted by john marcella

This is one of my 4 into 1 water manifolds. It's set up for 4 #10 o-ring fittings (but you can use a combination fitting that is up to #12) and 1 #20 o-ring on the opposing side.
I also make a 2 into 1 water manifold. It uses 2 #16 to 1 #20.
Both have provisions for NPT for water temp pick up.

Interesting...is this something you make?..sell?
Could be used to pipe water from both ends of heads..

[john marcella]

Yes,yes and exactly. $135 No fittings, but they are not to much.
It packages way better and looks so much nicer, radiator hose is only about 4-6 inches long. And you can pull water from where ever you want!!!! If i get a chance i will take pics of my set up.

[grandville455]

VERY NICE ! I would love to see pics also!

[60man]

Originally Posted by john marcella

Yes,yes and exactly. $135 No fittings, but they are not to much.
It packages way better and looks so much nicer, radiator hose is only about 4-6 inches long. And you can pull water from where ever you want!!!! If i get a chance i will take pics of my set up.

Cool....would like to some pictures of your setup showing the water temp probe too...
Thanks

[lugnutt]

That looks nice. Does the maniflold just hang there by the support of the hoses, or is there a mounting bracket? Do you make these? Do you stock these?

[john marcella]

This is my set up, its old-before the 2pcs billet design. I am picking up water between the middle exhaust ports.The water temp is in the middle of the water manifold.

[quick67bird]

Originally Posted by john marcella

Yes,yes and exactly. $135 No fittings, but they are not to much.
It packages way better and looks so much nicer, radiator hose is only about 4-6 inches long. And you can pull water from where ever you want!!!! If i get a chance i will take pics of my set up.

If we would like one of these manifolds how do we go about ordering one from you John?