| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Looking to put a 3 point seat belt in my 68 firebird.
I was looking at a set from snappin turtle I saw at English town.swap meet. My question is has anyone used these and if so how would you go about mounting the top ancor ? I have a new head liner allready installed and dont want to hack it. Any input would be great. Thanks.
|
|
#2
|
|||
|
|||
|
can you use the factory mount points?
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
|
#3
|
|||
|
|||
|
The bottom ones should work. Not sure where or how to mount the top.
|
|
#4
|
|||
|
|||
|
factory shoulder belts used 2 smaller holes about same location as the coat hanger.
if you carefully peel back the lower part of headliner you can see the plate and tapped holes
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
|
#5
|
|||
|
|||
|
Thanks for the help.
I'll see if I can find the mounting point under the headliner tonight. |
|
#6
|
||||
|
||||
|
If you haven't already bought them, look at Morris Classic Concepts. I put his 3 pts in all 4 seating positions in my 69 bird. very nice product.
|
|
#7
|
||||
|
||||
|
http://forums.maxperformanceinc.com/...d.php?t=703049
Here's a thread about how I installed my 3 pt belts. Pics aren't the greatest, and the interior is still ratty waiting on resto after bodywork is done, but it's enough to get the idea. It might help.
__________________
"...ridge reamer and ring compressor? Do they have tools like that?" |
|
#8
|
||||
|
||||
|
I put the Morris belts in several years ago. I had a picture of the upper mount with my headliner out. Here is the link. Hope it helps
http://forums.maxperformanceinc.com/...d.php?t=435425 |
| Reply |
|
|