[76GoldGP]

The rear part of my 76 GP single exhaust was removed from the car just behind the muffler by the previous owner. I have found a GP with this exhaust in a self-service junk yard. The system is welded all the way though, so I can't get it off from under the car.

Are these exhaust systems available with the exact curves needed, to go over the rear axle if I take the car to an exhaust place? - Or, should I try and hacksaw the parts off the junkyard car? They are in good condition.

Thanks,

[2002Z4CSS]

Originally Posted by 76GoldGP

The rear part of my 76 GP single exhaust was removed from the car just behind the muffler by the previous owner. I have found a GP with this exhaust in a self-service junk yard. The system is welded all the way though, so I can't get it off from under the car.

Are these exhaust systems available with the exact curves needed, to go over the rear axle if I take the car to an exhaust place? - Or, should I try and hacksaw the parts off the junkyard car? They are in good condition.

Thanks,

Sounds like you need a tail pipe. If you buy the one from the junk yard you can get a chain cutter that will cut off that welded pipe very quickly and straighter than a hack saw. Then maybe a exhaust pipe union with clamps or have the tail pipe welded to your muffler.

[76GoldGP]

Thanks I followed your advice and rented a chain tailpipe cutter from Auto Zone. It worked great, and the pipes were almost like new. Unbelieveble after 37 years...

/Hans

[2002Z4CSS]

Originally Posted by 76GoldGP

Thanks I followed your advice and rented a chain tailpipe cutter from Auto Zone. It worked great, and the pipes were almost like new. Unbelieveble after 37 years...

/Hans

Glad to hear it worked out and you saved some cash in the process. Nothing better than OEM exhaust pipes since they have to meet a 10 year emissions cert.