| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
03-21-2015, 01:44 PM
|
||||
|
||||
what did it make?
468, EFI victor, ported, 1/2 spacer, KRE D Ports flowed 325 on tight bench, solid roller 265/270, net lift after lash, .725, .703.. 110 LSA, at 106. 1050 Dom. Hedman 1 7/8 headers. 11.1 comp, 91 octane.
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74  2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#2
03-21-2015, 01:49 PM
|
||||
|
||||
670 HP
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/3.08 2002 WS6 Convertible LS1/4L60E/3.23 1966 VW Type 2 Single Cab Pickup 140hp 2276 1956 VW Type 2 Panel Van 36hp 1200 1957 VW Type 1 Beetle 180hp 2276 |
|
#3
03-21-2015, 01:54 PM
|
||||
|
||||
|
685 HP
__________________
67 Firebird 467 cubic inches 7.71 @ 92 in the 1/8 and 11.69 @ 115 in the 1/4. |
|
#4
03-21-2015, 02:16 PM
|
||||
|
||||
|
651hp, 597tq
|
|
#5
03-21-2015, 05:07 PM
|
||||
|
||||
|
705
|
|
#6
03-21-2015, 05:16 PM
|
||||
|
||||
|
658HP
__________________
 2023 Best ET Slip 60’ 1.224 330 3.186 1/8 4.784 MPH 152.07 1000 6.175 ET 7.347 MPH 189.92 Weight 3650 YouTube Channel --> https://www.youtube.com/channel/UC21...rWwgFdfTRqShGQ FaceBook Group --> https://www.facebook.com/groups/220092308823847/ |
|
#7
03-21-2015, 05:40 PM
|
||||
|
||||
|
640 hp
__________________
Greg Weigart IAIIA 520/pump gas/SD 325 E-heads/266-272 SR cam/1050 Dominator/3.73/ET Street Radial Pro/3300lbs/1.35 60'/[email protected]/[email protected] Hot Rod Drag Week finishing averages: 2014 - 11.12 @ 118.56 2015 - 10.84 @ 124.97 2016 - 10.56 @ 127.88 2017 - 10.29 @ 130.74 2018 - 10.29 @ 130.53 2019 - 10.16 @ 132.34 2021 - 10.09 @ 132.69 - Quickest Pontiac 2022 - 10.13 @ 133.07 2025 - [email protected] - 2nd place SRBBNA 
|
|
#8
03-21-2015, 06:42 PM
|
||||
|
||||
|
625
__________________
 frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. 
|
|
#9
03-21-2015, 07:17 PM
|
||||
|
||||
|
680 hp, 610 tq
__________________
www.hobracing.com |
|
#10
03-21-2015, 08:01 PM
|
||||
|
||||
|
650hp. Come on spill the beans already.
|
|
#11
03-21-2015, 08:17 PM
|
||||
|
||||
|
Some of you know already! Lol..
651 @6500 597 @ 4900 26 total! 600 avg HP 570 avg ft lbs That was the tenth pull only and we stopped as motor was heat soaked, we kept it around 170 water temp and 150 oil I think it was, oil curve was flat!
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#12
03-21-2015, 09:13 PM
|
|||
|
|||
|
Nice!
|
|
#13
03-21-2015, 09:44 PM
|
|||
|
|||
Quote:
|
|
#14
03-22-2015, 12:54 AM
|
||||
|
||||
|
Congrats!
__________________
EHTTFMF!  Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
|
#15
03-22-2015, 06:12 AM
|
||||
|
||||
|
Quote:
You've come a long way baby!     
__________________
Carburetor building & modification services Servicing the Pontiac community over 25 years Last edited by shaker455; 03-22-2015 at 06:19 AM. |
|
#16
03-22-2015, 08:10 AM
|
||||
|
||||
|
good job......that thing should get some pretty good fuel mileage, can anyone say a reverse LS swap?....but that is another story.
__________________
 1963 Cat SD Clone (old school) streeter 1964 GTO post coupe, tripower, 4speed (build) 1965 GTO 389 tripower, 4 speed, driver 1966 GTO dragcar 1966 GTO Tri power, 4speed, barn find 1966 GTO Ragtop 1969 GTO Judge RA lll, auto 1970 GP SSJ 1970 GTO barn find..TLB…390 horse?….yeh, 390 1973 Grand Safari wagon, 700hp stoplight sleeper 525ci DCI & 609ci LM V head builds Factory stock oval track car |
|
#17
03-22-2015, 08:52 AM
|
||||
|
||||
|
Quote:
__________________
Carburetor building & modification services Servicing the Pontiac community over 25 years |
|
#18
03-22-2015, 09:44 AM
|
||||
|
||||
|
Here they are, one is the EGT sheet, The afr was not lean, we looked at the plugs.
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,[email protected]@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, [email protected] [email protected] M/T 275/60 ET SS Drag Radial 2024(Pontiac 505) 1.25 60 ft, [email protected], [email protected].... 275/60 Radial Pro's |
|
#19
03-22-2015, 09:49 AM
|
||||
|
||||
|
Who's dyno was this?
Do you have the graph too? I take it the AFR is not correct as you would have not made that kind of power. Can you post your build so I can look your combo over? Thanks
__________________
Carburetor building & modification services Servicing the Pontiac community over 25 years Last edited by shaker455; 03-22-2015 at 09:56 AM. |
|
#20
03-22-2015, 09:51 AM
|
||||
|
||||
|
Was more timing tried?
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
