| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-17-2017, 06:36 PM
|
||||
|
||||
Jones Mufflers
Im looking at doing some tail pipes for the car and need to change out the mufflers to centre outlets
I saw some Jones mufflers on the summit site when I was looking at tailpipes ... anyone used them ...they seem REAL inexpensive..... I currently have a Pypes System with there Mufflers that I like but the tail pipes don't fit worth a........ Any input is appreciated...
__________________
 1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best [email protected] Lookin for 11's
|
|
#2
12-17-2017, 06:57 PM
|
||||
|
||||
|
Quote:
Might look at Vibrant as well, they are rather inexpensive and supposedly better quality. Personally, I bit the bullet and bought the Borla ProXS (hope to have them installed next week).
__________________
'73 T/A (sold). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 317rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'. '67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust |
|
#3
12-17-2017, 07:45 PM
|
||||
|
||||
|
The Jones/Fullboar mufflers are SS construction, have nice welds and look to be a high quality muffler. I bought mine new from one of the vendors on ebay. $40 each. I figure since Andretti or Foose are not endorse them, I thought I'd take the savings and give them a try.
Exhaust note is of the comparable brands. https://www.ebay.com/itm/2-O-C-Perfo....c100005.m1851
__________________
Home of WFO Hyperformance Shaker induction. Last edited by Larry Navarro; 12-17-2017 at 07:58 PM. |
|
#4
12-29-2017, 01:58 PM
|
||||
|
||||
|
I have the Jones Max Flow mufflers on my car. Sounds great. Nice looking and well built mufflers.
|
|
#5
12-30-2017, 05:20 PM
|
||||
|
||||
|
I need to measure the pypes mufflers I currently have to see what size is comparable to them for fitment....thanks for the info ...
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best [email protected] Lookin for 11's
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
