Even in a worst case scenario this may be a blessing in disguise. I never liked the ticking of the Lunati lifters. IF I need a cam and lifters what should I be looking at. I have the TKO600 with the .64 final drive and 3.70 gears with a 26 inch tall tire. I looked at the Lunati website in case my cam is not salvageable and they are out of almost everything. My machinist is of the opinion that since its running right now that there is a small chance of a catastrophic failure and that no machine work should be necessary other than checking the bearings. I am going to replace the Torker with a Performer RPM. Any other suggestions before I drop it off next Monday?
__________________
468/TKO600 Ford thru bolt equipped 64 Tempest Custom. Custom Nocturne Blue with black interior.
|
08-22-2022, 07:37 PM
Threaded Mode