[john marcella]

Originally Posted by quick67bird

If we would like one of these manifolds how do we go about ordering one from you John?

Call me. Marcella Manifolds 248-259-6696
Ill see if i have pics of the 2 into 1 as well. Buts its #16 to #20.
4 into 1 are in stock and i have one 2 into 1
$135 & $145 i can add a radiator cap as well +50

[huddie]

So,do you tap and plug the water pump housing?Thanks for the pic's.

[quick67bird]

Originally Posted by huddie

So,do you tap and plug the water pump housing?Thanks for the pic's.

Yeah. From what I understand a lot of people do not use the bypass anyways. A lot of racers either just use a restrictor or drill holes in the thermostat.

[60man]

Sent you a PM John...

[grandville455]

How would this work For My KRE Heads? Would U run a line to each in back ,and also to the two front one's too? Also street driven, So U plug the hole that normally goes to the cross over on the timing cover, and the nipple on the side of the timing cover too?

[60man]

Got my water maniflod today. Very nice quality !!!
Thank you John..
Troy

[russosborne]

Are these only for aluminum heads, or could they be used on factory iron heads as well?
Thanks,
Russ

[huddie]

If you get time could you post a pic of the two into one?Thanks,Lance

[lugnutt]

I ordered one of these today (finally!). Just thought I'd bump this back up for John!

[jm455ho]

Got mine several weeks ago. Very nice piece.

[jm455ho]

[QUOTE=john marcella;4515616]This is one of my 4 into 1 water manifolds. It's set up for 4 #10 o-ring fittings (but you can use a combination fitting that is up to #12) and 1 #20 o-ring on the opposing side.
I also make a 2 into 1 water manifold. It uses 2 #16 to 1 #20.
Both have provisions for NPT for water temp pick up.


Anyone with a brand and part number for the #20 fitting?
Thanks
John

[60man]

[QUOTE=jm455ho;4868284]

Originally Posted by john marcella

This is one of my 4 into 1 water manifolds. It's set up for 4 #10 o-ring fittings (but you can use a combination fitting that is up to #12) and 1 #20 o-ring on the opposing side.
I also make a 2 into 1 water manifold. It uses 2 #16 to 1 #20.
Both have provisions for NPT for water temp pick up.


Anyone with a brand and part number for the #20 fitting?
Thanks
John

Got mine from Jegs....don't have part # handy..I just looked under 20 AN in search window

[john marcella]

[QUOTE=jm455ho;4868284]

Originally Posted by john marcella

This is one of my 4 into 1 water manifolds. It's set up for 4 #10 o-ring fittings (but you can use a combination fitting that is up to #12) and 1 #20 o-ring on the opposing side.
I also make a 2 into 1 water manifold. It uses 2 #16 to 1 #20.
Both have provisions for NPT for water temp pick up.


Anyone with a brand and part number for the #20 fitting?
Thanks
John

Jerry Bickel race cars or Rick Jones race cars has them, good price to.

[beastmaster]

Originally Posted by john marcella

This is my set up, its old-before the 2pcs billet design. I am picking up water between the middle exhaust ports.The water temp is in the middle of the water manifold.

John do have anything for the 3rd Gen Bird body style which the radiator sits lower than the top of the block.

[R 70 Judge]

Originally Posted by john marcella

This is one of my 4 into 1 water manifolds. It's set up for 4 #10 o-ring fittings (but you can use a combination fitting that is up to #12) and 1 #20 o-ring on the opposing side.
I also make a 2 into 1 water manifold. It uses 2 #16 to 1 #20.
Both have provisions for NPT for water temp pick up.

John are you bringing any of these with you to Norwalk?

[john marcella]

I will bring a few. Price has gone up though. 160$ My cost went way up on having them cut.

[R 70 Judge]

Originally Posted by john marcella

I will bring a few. Price has gone up though. 160$ My cost went way up on having them cut.

Thanks John. Still worth it for such a nice piece. Please save one for me if you can. Jim Robertson said he will stop by to pick it up for my build. If you still have any of the older style ones with the "M" on them that would be fine too. They are both works of art

[67cruiser]

John, may i ask, its such a long run all the way around motor and back to your home connector,wouldn,t been better just to go under the intake??
Saving my pennys, i got to have one of these, I love the looks!! Opps thought lines went around backside of motor, my mistake!! Senoir citizen momment!!

[RUDOLFSSON]

Nice work!

[Robert Williams]

got mine from jegs made by Meziere part number WN0032S this number is for a black fitting and they have other colors also.